Supreme Industries Share Price

Incorporated on February 17, 1942 at Wadala, Mumbai, Supreme Industries Limited (SIL) was promoted by the family of Kantilal K Modi. In August 1966, the Taparia family took control of the Company through outright purchase of shares. Today it has one of the largest plastic processors in the country, with a product range catering to both, the industrial and consumer segment. The Company is presently operating nearly 30 manufacturing facilities spread across India with an asset base of over Rs 2500 Cr. It has distribution network to market the product brand and offer a wide and comprehensive range of plastic products in India. It is engaged mainly in production of plastic products and operate in various product categories like Plastic Piping System, Cross Laminated Films Products, Protective Packaging Products, Industrial Molded Components, Molded Furniture, Storage Material Handling Products, Performance Packaging Films and Composite LPG Cylinders.The Company came out with a rights issue in July 1993 to expand and upgrade its products and plant equipment. It bought assets of Litelon Pvt. Ltd. in 1996 and Camphor Allied Products in 1998 that were manufacturers of protective packaging products. In 2000, it sold its wholly owned subsidiary, Premier Lighting Industries. Supreme Oriented Films and Supreme Vinyl Films was amalgamated with the Supreme Industries Ltd with the prior approval from the shareholders to consolidate the groups plastic packaging business under one company as well as consolidate its marketing operations. Both the Company Shareholders were allotted shares in the ratio of 1:90 for SVFL and 1:22 for SOFL.Siltap Chemicals Ltd. amalgamated with the Company during the year 200203. During the year under review, Supreme Industries closed down its manufacturing operations at Puducherry Unit 1. In 200304, Company set up Guwahati unit for manufacturing furniture and crates. It divested the business and assets of BOPP film division at Pitampur in Madhya Pradesh. In 200506, the Company set up a wholly owned subsidiary viz. Supreme Industries Overseas (FZE) at SAIF Zone in Sharjah to improve its share of exports of plastic piping system. It closed down furniture business at Kanpur unit and revamped it to produce PVC pipes. In 200607, the Company restructured and revamped the Khushkhera Unit to manufacture industrial products. During the year 200607, it divested immovable properties at the Salt Late unit in Calcutta. It closed down the business of Food Service Ware division at Daman and divested assets as well. During the year 200607 the company closed manufacturing operations of rigid PVC film at Malanpur in Madhya Pradesh and divested its manufacturing equipment. In 200708, the Company commenced commercial production at Gadegaon Complex in Maharashtra set up on 132 acre of land to manufacture PVC, HDPE, CPVC, PPR pipes, handmade fittings, furniture and crates. The Company commenced commercial production at the Urse Plant near Pune (Maharashtra) for Protective Packaging Products. It also introduced Gas Injection Moulded Chairs for the first time in the country.In 200809, the Company became the first Indian Company to launch injection moulded pallets in the country. In 200910, the Company commenced commercial production at the Urse Plant near Pune in Maharashtra for protective packaging products. It aslo introduced gas injection moulded chairs for the first time in the country. In 201011, the Company set up stateoftheart Knowledge Centre at Gadegaon in Maharashtra with an investment of over Rs 10 crore to impart training to plumping professionals. It set up two new units at Chennai and Noida for industrial products. In 201112, it closed down the PP MAT division. In 201213, the Company set up a new unit at Hosur for protective packaging products and at Getmuvala in Gujarat for manufacturing cross laminated film products. It revamped the Malanpur II plant to manufacture plastic piping system and commenced production. The first phase of Unit II of Hosur started since Oct 2012.In 201314, the Company installed facility to manufacture varieties of solvent at the Gadegaon Plant in Maharashtra.In 201415, the Company acquired worldwide exclusive rights to manufacture and sell cross laminated film products from collaborator. It commenced commercial production of composite cylinder at Halol Unit. In 201516, the Company set up Roto Moulding unit at Malanpur to manufacture water tanks, septic tanks and other Roto Moulded products. It set up another plastic product complex at Kharagpur in 59 acres of land to manufacture PVC, HD, PPR Pipes, Roto Moulded products, protective packing products and blow moulded furniture. It abandoned the project of composite pipes for oil and gas exploration. In 201617, the Company commenced manufacture of Roto Moulded products at Kanpur and blow moulded furniture at Kharagpur. In 201718, the Company was allotted 50 acres of land by State Government of Telangana. During the year 2018, it commenced project work at Ghiloth, in Rajasthan to manufacture industrial plastic components. The Company had entered into a Joint Venture Agreement Business Transfer Agreement on 4 April 2018 with Kumi Kasei Co.Ltd., Japan (Kumi) and formed a Joint Venture Company named Kumi Supreme India Private Ltd. (KSIPL). The Company shall hold 20.67% Share Capital of JVC. The joint venture would undertake the business of manufacture and sale of injection molded plastic components for automotive application at its manufacturing unit at Khushkhera in Rajasthan. The Auto Comp Business (part of Companys industrial Product Segment) of the designated unit is proposed to be transferred by the Company as a going concern on a slump sale basis. The said unit is primarily engaged in the manufacturing of plastic components for automotive application and forms part of Industrial Product Segment of the Company.The production commenced in 201819, where the Company established a new plant to manufacture PP Corrugated Sheets at Derabassi Unit. Yet, another new plant of HDPE Pipe at Malanpur Unit III (M.P.) was also commissioned.During the year 201819, the Company put up two new facilities at Giloth (Rajasthan) and Jadcherla (Telangana). It divested Khushkhera Unit to a newly formed Joint Venture Company namely Kumi Supreme India Private Limited. It shifted the existing property, plant and equipment of Hosur Unit I to newly expanded Hosur Unit II to achieve better synergies and cost optimization. It launched Roto Moulded temporary Toilet and multistation Urinal basically for construction sites, melas and exhibitions. It introduced 63 nos. of variety of Injection Moulded Pipe fittings. Apart from this, it also organized 276 Plumbing workshops in 201819. During the year 2019, the Company successfully completed the process of setting up a Green Field project for manufacture of Injection Moulded Furniture at Jadcherla near Hyderabad in Telangana.In 2020, the Company launched Premium range of Water Tanks branded as Weather Shield with added features such as superior thermal insulation etc., from two locations with good market response. It further introduced 36 nos. of variety of Injection Moulded Pipe fittings during 201920. The Company planned of introducing further new items during the year as per system requirement. With the help of specialists, it embarked upon a new activity with nomenclature as Plumbing Workshop which is a full day session with Plumbers. Besides this, it organized 284 Plumbing workshops in the year 201920 throughout the year.During the year 2020, the Company received Excellent Business Partner Award , a unique recognition given for long and sustained mutual business association.The production of Double Wall Corrugated HDPE Pipes has started from Gadegaon and Kharagpur plants with BIS Certification. The Company is in process to educate various departments the benefits of putting in place a good quality DWC Pipes with latest technology and using virgin certified raw materials in terms of performance and longer life. The Company introduced 154 nos. of variety of Injection Moulded Pipe fittings during 202021. In the year 202021, the Company commissioned a new plant of Protective Packaging products at Jadchelra, Telangana Unit. It acquired additional plot of land at Roto Plant in Malanpur for future expansion/ warehousing facilities. It commissioned another new plant of PVC Fitting products at Kharagpur (West Bengal) as well as new plant of PVC Pipe products and Olefin Fittings at Jadchelra (Telangana).In 202021, the Company has started manufacturing variety of Specialized Valves such as Butterfly Valves, Swing Check Valves, Ball type nonreturn Valve etc. These Valves have been designed for different applications like Industrial, Agriculture and Plumbing segment. They are made of specialized materials to ensure reliability longer life and also to meet best of global standards.In 202122, the Company took over the execution of three greenfield projects at Guwahati (Assam), Cuttak (Odisha) Erode (Tamil Nadu) to manufacture various plastic pricing products. During the year 202223, the Company introduced three new greenfield sites which went into commercial production one after the other. It started manufacturing at Perundurai Plant in Tamil Nadu. Kharagpur Plant was commissioned and fully operational. DWC Pipe for Cable Ducting application was launched. The Company started manufacturing Braided and Plain Hoses at Guwahati, Gadegaon, Erode and Cuttack Plants. Electrofusion Olefins fittings and compression molded fitting were launched. It launched Cable shield conduit system made at Gadegaon, Cuttack. Kanpur and Erode factory. It introduced AQUAKRAFT Bath Fittings, knock down DIY chair model Vecto developed a new variant of Capcell (Single Stage EVA Foam) product for (Photovoltaic Cell ) Packagining, input material specification and launched new product for floor protection under the brand name of SUPREME FLOOR GUARD.In 2024, Company added one new unit in its production portfolio by acquiring an undertaking at Sangli (Maharashtra) in the segment of Plastic piping Products. The Company increased the capacity of PVC Pipes and also started manufacturing of Blow Moulded Water Tanks at Erode during the year. Kharagpur Plant became fully operational in 2024. The Company launched suitable DWC Pipe for Cable Ducting application. It further started manufacturing Braided and Plain Hoses at Guwahati, Gadegaon, Erode and Cuttack Plants. It introduced elite brand of PEX pipe Systems in 2024. It has launched Electrofusion Olefins fittings and compression molded fitting with a portfolio of 226 Nos. Also. it launched Cable shield conduit system. The Company has acquired undertaking of M/s Parvati Agro Plast, at Sangli, Maharashtra with two major objectives i.e., to add a new Product category OPVC Pipes i.e., Oriented PVC Pipes and effective servicing of Western Maharashtra and North Karnataka.In 202425, the Companys 30th state of art facility at Malanpur (M.P.) to manufacture Industrial Ball Valves became operational effective from 01.09.2024. The Company has launched Electrofusion Olefins fittings and compression molded fitting with a portfolio of 639 Nos. in FY 2025. Further, it launched Cable shield conduit system.

As of 13 Jun, 2025, SUPREMEIND share price is ₹4349.8. The stock opened at ₹4230 and had closed at ₹4282.2 the previous day. During today’s trading session, SUPREMEIND share price moved between ₹4,211.90 and ₹4,366.00, with an average price for the day of ₹4.00. Over the last 52 weeks, the stock has recorded a low of ₹3,095.00 and a high of ₹6,360.00. In terms of performance, SUPREMEIND share price has declined by 9.4% over the past six months and has declined by 29.29% over the last year.